HP SmartStart CD x64 version 8.70 (B) contains one or more software components that were signed with a digital signature that was revoked on October 21, 2014. Refer to for more information about affected components. To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value: 86b1ecf8aad403ea93dfd019cd3ad1971dcf5380d72bbc5ea1287ea29334dafb smartstart-8.70B-0-x64.zip Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained. What's New for SmartStart 8.30 Part Number 503590-005b September 2009 (Fifth Edition). O HP ProLiant ML350 G4p Server. New SmartStart features 5. O HP ProLiant DL320 G6 Server o HP ProLiant ML310 G5 Server Microsoft® Windows® New components for ProLiant Support Pack (PSP). Solved: I have a few DL380 G6's that work fine, and any OS can be loaded onto them, but will not run the SmartStart diags CD. I have tried every conceivable version. Installation: For Available Support Documentation for SmartStart 8.70 and 8.70b: • What's New, please visit the • Release Notes, please visit the • New Product Support, please visit the • Quick Overview of the SmartStart standard features, please visit the • ProLiant Support Pack (PSP) User Guide, please visit • Supported Server Guide - please visit:. Contents of this ZIP file: • Readme.txt • CD ISO image Making a physical CD from an ISO image file Download the file to a temporary directory and extract the ISO image to that directory. To create a CD from this ISO image, you must use a software utility capable of writing an ISO file to a recordable media such as CD-R. • Note: Simply copying the ISO file to a CD-R will NOT result in a usable CD. HP recommends you run MD5 Checksum on the Zip file and/or ISO image prior to burning the CD. HP also recommends that you turn the verify feature 'ON'. CD labeling: For reference purposes, please label your resulting CD as follows: • SmartStart CD Release 8.70 x64 Copying the ISO Image file to the HP USB Key Utility For Windows The HP USB Key Utility is a Windows application that will allow the user to copy the Firmware Maintenance CD contents to a USB memory key. Users may then run the Firmware Maintenance applications from a USB key instead of from the CD. To download the HP USB Key Utility for windows, go to:. End User License Agreements: HP SmartStart CD x64 version 8.70 (B) contains one or more software components that were signed with a digital signature that was revoked on October 21, 2014. Refer to for more information about affected components. Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience. Important: **ATTENTION** IMPORTANT WINDOWS INFORMATION: If installing Windows® Server 2008 Service Pack 2 (x64) with four AMD Opteron™ 6200 Series Processors and greater than 32 cores, Microsoft hotfix kb2563727 will need to be applied. To install without this hotfix, reduce the processor core count to 32 or less through ROM Based Setup Utility (RBSU) until the hotfix is applied. For more information refer to: Microsoft Article ID 2563727 '0x000000BE' Stop error when you install Windows Vista or Windows Server 2008 if more than two 16-core Opteron™ 6200 Series processors are installed () SmartStart v8.70b is the recommended SmartStart to use when installing HP Branded Microsoft ® Windows ® products. The previous version, SmartStart v8.70, does not support AMD Opteron TM 6200 Series Processors. To obtain SmartStart v8.70b, see the HP website: (). Note: No media will be provided.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
November 2018
Categories |